Securing your premises is a major concern in modern society with the cost of crime now standing at $12.6 billion. There are numerous ways of safeguarding your property and a surveillance system is one of them. At the fundamental level, installing a CCTV system won’t solve all your security concerns, but it can form an important part of your overall security solution. You need to consider all factors possible to be confident that you can obtain your desired results without suffering the embarrassment of having a very expensive, yet ineffective CCTV system. At the end of the day, a home video surveillance system is just a deterrent, and not a panacea.
Possible problems for Video Surveillance System
Normally, the purpose of installing a video surveillance system is to protect the property against trespass, theft, vandalism or protect high value goods by providing recorded video footage or all activity in and around the house. Here are some of the common problems you may encounter in installing and maintaining an effective home video surveillance system.
* Problems getting the system to function properly, including using basic functions such as recording video, saving event snapshots or clips.
* The provided cables may be too long or not long enough
* Poor or no support with regards to technical issues. Some manuals are too poorly written to be of use.
* Problems establishing a port forwarding link to your router.
* Camera lens that do not suit the required scenes.
15 top tips for maintaining your home video surveillance system
In order to ensure that you home security system keeps functioning optimally, you’ll need to schedule a regular CCTV maintenance checklist. This will help protect your investment while ensuring that you get the best possible performance from your security system. Below are the 15 tips for your security camera maintenance.
1.Clean camera lenses
Check your outdoor and indoor camera lenses to ensure they are always clean. Look for smudges, dust, water-spots and other undesirable elements. Your camera won’t get clear shots if your lenses are smudged or dirty. You should ideally start by using a compressed air can to blow the lens and remove all loose debris before using a microfiber brush to wipe the lenses very gently.
visit How to Clean a CCTV Camera Lens for more CCTV camera cleaning solutions.
2.Trim the landscaping
Check all your outdoors camera view to make sure that all provide a clear view. Keep bushes, vines, trees and other plants near the cameras trimmed to prevent them from obstructing the camera.
3.Check the camera’s housing
The camera’s enclosures should remain water proof and you can check this by opening your security cameras’ housing to check for signs of water, dirt and condensation. This way, you will know whether the enclosures are still protecting the cameras from rain and wind.
4.Check for corrosion
Check out all connectors for signs of corrosion. If you found any corroded one, replace it immediately since it can cause the rest of the equipment to short out.
5.Ensure that all cables are connected securely
Check all cable connectors, including those connecting the monitor, DVR and security cameras to ensure that they are all receiving power. Also check the cabling for any signs of wear and tear, replace any exposed wire immediately.
6.Check the power supply
Check the power supplies to your home video security systems to ensure that there is no loss of power due to storms, tampering, brownouts or other unwanted events. Check your UPS to ensure the battery are fully charged and don’t show any warning lights. You may also want to check that your surveilance cameras are receiving their recommended power requirements using a voltmeter. Otherwise, the camera may fail rapidly and it is always cheaper to replace the power supply than buy a new security camera.
7.Dust your DVR
The DVR may collect a layer of dust over time, and this must be wiped of regularly to prevent it from affecting the DVR’s performance. Use a microfiber cloth to wipe your DVR or use a blower to dust the crevices.
ANNKE 8CH 3MP DVR $79.99 at Annkesecurity
8.Emptying the hard drive
A large hard drive is needed to record and store a lot of data, but even one as big as 1 Terabyte will only store about 3 weeks of full motion video from a single camera. This means that you have to periodically back up and delete the video once the hard drive fills up. However, this may not be easy if you are using ultra-modern surveillance kits from companies like Annke that includes aps that allow remote storage and viewing.
Get a more than 3TB HDD from annkesecurity.com
9.Verify the recording function at least once per week
Have a reminder to check on the camera system recording ability each week. It is always important to find out if there is something wrong with the system before a major security incident actually occurs, only for you to find that you have to useable footage of the incident.
10.Periodically review camera position set ups
This should be done to ensure optimum location and camera focus. You may include an extra camera to capture “fill the frame” images of potential suspects as they move about your home in addition to the ones that cover the whole scene.
11.Check the lighting
Ensure that important areas have enough lighting to illuminate suspects for easy identification. You may have to install an additional camera to capture fill-the frame images of suspects as they move about the home in addition to those that cover the whole scene.
12.Check and remove any banners, posters etc. that obstruct the camera’s view
The camera’s line of sight should remain unobstructed, and obstruction typically happens when banners or posters are placed in front of hidden camera locations by other individuals.
13.Set the correct date and time
On a daily basis check to ensure that the correct date and time are generated by the DVR and displayed on the monitor. Brief power outages may make it necessary for the time and date to be set.
Making a small investment in professional signage can help mitigate risks by confirming that you are in fact using video surveillance around your premises. Visible signage is the first lie of deterrence and helps enforce your property boundaries.
15.Secure a comprehensive maintenance coverage that includes inspection, cleanings and extended warranty coverage by professionals
A number of service level agreements to maintain your home video surveillance system are available and they may include loaner gear, emergency response, and instant availability of replacement parts.
In a word
Maintaining your home or business premises takes time, but keeping it from would-be criminals is an even bigger challenge. Your video surveillance cameras need regular maintenance to ensure a clear picture, uninterrupted feed and wholesome coverage of key areas. It is important to create a CCTV maintenance checklist for yourself so that you don’t miss out the CCTV maintenance as it is just as important as the safety of CCTV installation.